Multiline systems are commonly called “Pump to point” systems as lubricant is fed directly from each of the pumping elements located in the pump body via its own line to the lube point.
In the case of the PEG-250N Multiline pump (350 Bar) up to 15 pumping elements can be fitted. Both fixed and adjustable output pumping elements are available. Each pump element incorporates an adjustable relief valve to visually advise of a blockage down-stream and protect the pump from over pressure.
Further flexibility of the system can be achieved by adding progressive lubricant dividers to some or all outlet lines to cover additional lube points. When micro or proximity switches are added to these dividers extensive electrical monitoring of the system can be achieved at low cost.
This flexibility makes the system a very worth-while and cost effective alternative to dual line systems.
PEG PUMP 250N SERVICING FOUR LUBRICATION POINTS WITH ONE OUTLET CONNECTED TO A PROGRESSIVE LUBRICANT DIVIDER
Centralised Lubrication Product Range Click Here